Why construction vibration monitoring is necessary for your project

Getting your skyscraper built among the skyscrapers of the world is expensive on its own. Be careful not to make a mistake in the project as it can cost you dearly and be really unnecessary. Mistakes happen, but having the tools available for the job and not using them is not a mistake or accident. If a high-budget construction project fails because necessary equipment is not used, the blame usually goes to the construction company as they failed to implement it. Happy to say, there are solutions to these problems. Read on to learn more about construction vibration monitoring equipment. 

Getting your skyscraper built among the skyscrapers of the world is expensive on its own. Be careful not to make a mistake in the project as it can cost you dearly and be really unnecessary. Mistakes happen, but having the tools available for the job and not using them is not a mistake or accident. If a high-budget construction project fails because necessary equipment is not used, the blame usually goes to the construction company as they failed to implement it. Happy to say, there are solutions to these problems. Read on to learn more about construction vibration monitoring equipment. 

What is Meant by Construction Vibration

First, we will look at a scenario that could happen. Hopefully, it doesn’t, but these things happen. 

Let’s say you start the construction of your building project. Construction work is well on the way and you have completed five levels from the ground up. The worst thing that can happen is the structure gives way. Investigations proved that the construction vibration caused the failure, this proof is evident on the building next door that also suffered from the mishap. 

So not only is the construction site in the wreckage, but also the surrounding buildings that received some vibration damage. 

This construction project wasn’t vibration tested and monitored. This is just an example of what could happen if construction vibration is not tested and monitored. Some structures that surround your construction site might be very old and specific building materials have different vibration capabilities, anything more than the calculated vibration could cause destruction. It’s like some opera singers that break glass with their voice, it’s simply the max amount of vibration the glass could take before it’s shaken apart.  

The vibration can be caused by blasting, construction vehicles, power tools, generators and someone’s wife coming to fetch him. Just kidding about the last one. Do however confirm vibration limits before you fall short of the tower you are aiming to reach.

When you decide to use the construction vibration monitors equipment, you will quickly notice the difference. You will realize how many lives were put to the test back then before this geotechnical monitoring platform existed. 

Structural failure can have a serious impact on the project. Be safety conscious.  

Let’s look at some life-changing effects such tests could have on your project. They are not in any particular order but the first list shows what could happen without such testing equipment. 

Loss of lives

 If a floor pillar fails then it comes down, if there are workers in the way or not. 

Cost of repair next door

This can also vibrate beyond the neighbors and might have environmental impacts if you don’t keep track of it. 

Cost of repair on this site

 Fixing the problem could mean a full demolition and start over from the ground up. Not particularly what you may be looking for as an adventure. 

A lawsuit from investors

More often than not, once the empty land or site has been handed over to the construction company, they are responsible for problems, safety, and completion on time. 

If only the construction vibration monitors equipment was used, the project could have been completed in time. Below is the advantages when using construction vibration equipment

Project completion

 Completing the project without construction mishaps.

Finances

 No extra finances were needed for repairing a recently constructed section that failed. 

Health and Safety

 Structures in general can only handle a certain amount of vibration before a problem exists. These problems might be huge or small. Keeping in mind of your surroundings and knowing the safety limits can greatly increase production. 

Live monitoring

With the construction vibration monitoring equipment actively at hand. Any spike in vibration can immediately be reported and construction can be put on a halt for the solution to be implemented. 

To keep your construction site in order means that the geotechnical monitoring platform needs to be in place before work commences. 

The financial impact a construction failure can have is catastrophic. Making sure you have all the right tools for the job is important and making use of the construction vibration equipment is essential. If you have it available, use it! If you don’t have it available, get it!